Many thanks to loads of people who asked for a bit of info on how to make my CD receipt organiser that I made for the Blog Hop!! - Here are the instructions. If you click on the pic it should get bigger.
These are loads easier than they look.
Please note I made this sample with scraps of paper and card in response to the comments on my Blog hop post - it looks a lot simpler than the original because it is not decorated.
Personalize yours by stamping and adding decorations and embellishments but remember to keep them as thin as possible or it won't all fit in the CD case.
These directions work for a CD case only, they will not work for the Calendar CD cases.
Step 1 Cut two pieces of paper each measuring 12 inches by 4 and 1/8th inches.
Step 2 Score folds across the short width of the paper at the 2", 4", 6", 8", and 10" intervals - this is really easy if you have a scorepal.
Step 3 Turn the page over and score on the 1", 3", 5", 7", 9" and 11" intervals.
Step 4 Fold the paper concertina style noting the direction of the folds in my photo.
Step 5 Squash the folds together making sure your paper stack is nicely aligned on top of itself and doesn't veer off to the side.
Step 6 Repeat steps 2-5 for the other piece of patterned paper. It is real important that when you squash the 'concertina' together that you see the white side of the patterned paper.
Step 7 Cut 6 pieces of thin card each to measure 4 and 1/2 inches by 4 and 1/8 inches. Set one aside, it will become the front of your organiser file.
Step 8 Stand the concertina papers (white sides facing each other) up on the surface in front of you. Drop 5 of the thin cards in between the folds. You will notice that the cards should be oriented so's they match the height of the concertina paper. Spend a while looking at the step 8 photo so that you get the placement right.
Step 9 Squash it all down flat and punch 4 holes along the bottom all the way through. Do not go too close to the edge of the stack.
Step 10 Cut a 20" strand of thin ribbon in a co-ordinating colour and thread it through the holes. Tie a sturdy knot.
Step 11 Retrieve the piece of thin card left over from step 7. Stamp it or decorate it now.
Step 12 Adhere it to the front of the file section. I used extra strong double sided tape.
Step 13 Cut a piece of matching card 6 and 1/8" wide by 5 and 3/8" tall. Score and fold 3/4 inches in from each side - be very accurate here. Check it fits in your CD case, re-fold if necesssary. Trim the top 1 and 1/4" off the top of each flap.
Steps 14 to 17 Fold both flaps in and add extra strong double sided tape to each flap - now adhere the front section to the flaps to complete the file. The completed concertina file may be stck into the CD case now - I used extra strong double sided tape in discrete areas and attached some decorated paper to the exterior to mask the adhesive.
Step 18 Cut a front panel from the paper or card of your choice - I cut mine 4 and 7/8" by 4 and 3/4" and added stamping and decorations. I used extra strong double sided tape in discrete areas over patterned paper and rubbed it well down - it was nearly invisible over the patterned paper so didn't have to camoflage the front.
Stand back and admire your work - wasn't that easy peasy?
Well I'm off to bed now - I hope this works well for you - I'd love to see any that you might make!!
Hello and welcome to WMS blog! My name is Claire Brennan and I design and produce clear photopolymer stamps, oh and make a few samples!! I live and work in Northern Ireland and I'm a huge fan of Christmas! LOL, I hope you find something different here! Thanks for visiting. Click on my pic to visit my store and find out more. Any questions, pop me an email: email@example.com
Read More http://www.kevinandamanda.com/whatsnew/tutorials/blog-buttons.html#ixzz1T71jsG1E
The following companies have supplied me with free product for promotional purposes but I maintain my right to only endorse and use product that I actually love and feel is of great quality and value. I do not promote product that I do not believe in.